Introduction
Cooling is as critical as heating for year-round production. Shouguang Zhongtian designs effective cooling for warm climates.
Figure 1: Modern greenhouse by Shouguang Zhongtian
Evaporative Cooling
Pad and fan systems lower temperature by 5 to 10 degrees. Most common commercial method, best in dry climates.
Fogging
High-pressure misting cools while adding humidity. Effective in dry climates.
Figure 2: Professional growing system
Ventilation and Shading
Ridge vents provide free cooling. Shading blocks solar heat. Combined for comprehensive control.
Combining shading, ventilation, and evaporative cooling provides comprehensive summer climate control. The system should be automated to respond to real-time conditions.
External shading blocks solar heat before it enters the greenhouse. Retractable screens allow light on cloudy days. Ridge and side vents provide natural cooling when outdoor temperatures are favorable.
Shading and Ventilation
Fogging systems produce fine water droplets that evaporate before reaching the crop, cooling the air without wetting leaves. These work best in dry climates.
Pad-and-fan cooling systems consist of evaporative cooling pads on one wall and exhaust fans on the opposite wall. Air is pulled through the wet pads, evaporating water and cooling the greenhouse. Temperature reduction depends on humidity.
Cooling System Design
Combining shading, ventilation, and evaporative cooling provides comprehensive summer climate control. The system should be automated to respond to real-time conditions.
External shading blocks solar heat before it enters the greenhouse. Retractable screens allow light on cloudy days. Ridge and side vents provide natural cooling when outdoor temperatures are favorable.
Shading and Ventilation
Fogging systems produce fine water droplets that evaporate before reaching the crop, cooling the air without wetting leaves. These work best in dry climates.
Pad-and-fan cooling systems consist of evaporative cooling pads on one wall and exhaust fans on the opposite wall. Air is pulled through the wet pads, evaporating water and cooling the greenhouse. Temperature reduction depends on humidity.
Cooling System Design
Thermal screens block heat from entering while allowing light. Retractable screens give flexibility. In temperate climates, natural ventilation through ridge and side vents may provide sufficient cooling.
High-pressure misting systems produce droplets so fine they evaporate before reaching the crop. They cool both air and foliage. These are preferred in arid climates where pad systems waste water.
Alternative Cooling Methods
Water distribution must be uniform across the pad. Pumps and pipes need winter drainage to prevent freezing. Pad life is 3 to 5 years with proper maintenance.
Cooling pads are typically 100 to 150 mm thick cellulose material mounted on one wall. Exhaust fans on the opposite wall pull air through the wet pad. Air velocity should be 0.5 to 1.0 meters per second through the pad.
Pad and Fan Design
Effective cooling allows year-round production. Shouguang Zhongtian designs cooling systems matched to each growing region’s climate.
Combine multiple cooling strategies: external shade, ridge ventilation, and evaporative cooling. No single system handles all conditions. Automated controls switch between strategies based on outdoor temperature and humidity.
Cooling needs depend on local climate. In dry climates, evaporative cooling is highly effective. In humid climates, shade and ventilation are primary, with evaporative cooling as supplementary. Design for your worst-case conditions.
Designing Summer Cooling
Whether you are building your first greenhouse or expanding an existing operation, choose suppliers who understand both engineering and horticulture. The right partner provides not just equipment, but long-term support that helps your business grow.
Monitor your crops and environment continuously. Small adjustments in temperature, humidity, irrigation, and nutrition compound into large differences in yield and quality over a growing season. Keep detailed records to learn from each crop cycle.
Successful greenhouse production depends on three pillars: a well-designed structure, precise environmental control, and disciplined crop management. Investing in quality equipment from the beginning prevents costly problems later. Start with a clear business plan and a realistic budget before construction begins.
Key Takeaways for Growers
Conclusion
Effective cooling expands viable regions. Shouguang Zhongtian delivers climate-specific solutions.



